-
Auxiliary Equipment
-
-
Contact
EXTRUSION LINES
PRODUCTION, AND SALES OF CAST FILM, STRETCH FILM, SHEET, AND PLATE EXTRUSION EQUIPMENT
Single type suction machine
Classification：
Keyword：
Overview Introduction
The automatic suction machine is an automatic material conveying equipment, which uses the wind pressure generated by the super strong wind blower to transport raw materials.
E-mail: jack.zhang@5emachine.com
Phone / WhatsApp: +86-137-1228-0099
Message InquiryPrev：
PRODUCT DETAILS INTRODUCTION
Function of automatic suction machine:
● The automatic suction machine is an automatic material conveying equipment, which uses the wind pressure generated by the super strong wind blower to transport raw materials.
● Strong wind, high efficiency, small land occupation, space saving, low cost, beautiful and practical;
● It is characterized by convenient installation, simple operation, strong long-distance transportation capacity, stable production, etc.
● The suction machine is widely used in the injection molding industry, granulation industry, food, chemical industry, etc; It can be used with dryer, dehumidifier, host hopper and other related equipment, which is convenient for environmental protection.
Principle of automatic suction machine:
● The hopper of the suction machine is usually placed on the equipment to be pumped and stored (such as a dryer)
● The suction machine is composed of: hopper, inductive switch, mechanical air switch, filter screen, feed inlet, suction inlet, suction pipe, feed pipe and host
● Host: mainly the time relay controls the work and rest of the equipment. Components: motor, filter; Air inlet, air suction device, inductive connecting wire and multiple relays
● When there is no material in the small hopper of the suction machine, the mechanical air switch will fall downward and open the induction switch. When the induction switch is opened, the relay of the host machine will open to enable the motor to start running, and the motor will run to drive the exhaust device, and start to go to the small hopper through the air filter. Under the action of the air suction, the mechanical air switch will close the outlet upward to form a direct vacuum of the small hopper. There is a material pipe at the inlet to the hopper, The raw material starts to enter the small hopper and is isolated by the filter screen and will not be sucked into the direction of the motor. When the set operation time of the motor reaches, it will stop. When there is no vacuum in the small hopper, the mechanical air switch will fall, and the raw materials will fall into the dryer, and the circulation will end;
● In this way, the stored equipment can always be kept full. Easy to use and dry
Features of 400G monomer automatic suction machine:
● 400G adopts inductive high-pressure fan, which has low noise, long suction and service life
● Small size and light weight, can be directly placed on the dryer or other raw material containers to complete automatic feeding
● Microcomputer operation control program. Overload and shortage alarm,
● It is the first to use the wire controller to control, which can be set and controlled under the machine, convenient and fast.
Main parameters：
|
Mode |
5E-300G |
5E-400G |
5E-700G |
5E-800G |
5E-800G2 |
5E-900G |
||
|
motor Power |
type |
carbon brush |
induction |
carbon brush |
induction |
|||
|
specification |
1KW/220V |
0.75KW/380V |
1KW/220W |
1.1KW/380V |
2.2KW/380V |
2.2KW/380V |
||
|
Capacity(kg/t) |
290 |
350 |
300 |
300-400 |
350-450 |
300+300 |
||
|
Suction lift(m) |
- |
4 |
4 |
4 |
5 |
5 |
||
|
Static pressure(mm / H20) |
1300 |
1400 |
1550 |
1800 |
2400 |
2400 |
||
|
Capacity(L) |
7.5 |
7.5 |
7.5 |
7.5 |
7.5 |
7.5+7.5 |
||
|
tube diameter(mm) |
Φ38x3.5m/1pcs |
Φ38x4m/1 pcs |
Φ38x4m/2pcs |
Φ38x4m /2pcs |
Φ38x5m/2pcs |
Φ38x4m /4pcs |
||
|
outline dimension（cm） |
Main-machine |
/ |
/ |
37*37*55 |
46*38*70 |
50X40X72 |
60*50*82 |
|
|
storage barrel |
40*30*44 |
40*30*44 |
40*30*44 |
40*30*44 |
40*30*44 |
40*30*44 |
||
|
net weight(kg)
|
Main-machine |
11 |
32 |
18 |
46 |
58 |
85 |
|
|
storage barrel
|
/ |
/ |
6 |
6 |
6 |
6 |
||
PRODUCT DETAILS DISPLAY
COMPANY CULTURE
PRODUCTION, AND SALES OF CAST FILM, STRETCH FILM, SHEET, AND PLATE EXTRUSION EQUIPMENT
Easy to Install
Modular structure, reasonable layout, simple on-site connection, greatly shortening installation period, reducing difficulty and labor cost.
Easy to Debug
Clear and intuitive parameter interface, optimized preset process, simplified debugging steps, easy for new operators to quickly start stable production.
Easy to Operate
Humanized touch control, simple logic, one-key function switching, lower requirement for professional skills, easy and efficient operation.
Easy to Maintain
Open layout for key components, easy replacement of wearing parts, clear maintenance guidance, simple daily care, less downtime and lower cost.
Easy Upgrade
Reserved expansion interfaces for hardware, online update supported for software, flexible upgrade according to process and capacity needs, extending equipment life.
FREQUENTLY ASKED QUESTIONS
What are the regular maintenance tasks for the website?
Regular website maintenance is key to ensuring website security, stable operation, and user experience. Maintenance work includes updating website content, checking and fixing website links, backing up data, conducting regular security checks, fixing vulnerabilities, optimizing performance, etc. These tasks help ensure the long-term effective operation of the website and provide a good user experience.
What is the difference between UI and UX in website design?
UI (user interface) and UX (user experience) are two important aspects in website design. UI focuses on the appearance design, layout, and visual elements of a website, while UX emphasizes the overall user experience and interaction on the website, including usability, navigation, interaction, and more. Excellent UI design typically enhances the user experience.
